da ich ja leider nicht mit gehobenem technischen Fachwissen hinsichtlich des Tunings unserer Lieblinge aufwarten kann, bin ich demnach auf die rezensierend, entdeckende Tätigkeit beschränkt.
In dieser Hinsicht ist mir, hoffe ich, ein echtes Juwel gelungen. Zumindest den Fakten nach, scheint es sich bei diesem Gerät um ein Kleinod erster Güte zu handeln. Wir reden hier von einem Einstandspreis von ~ 300,-€ für ein Gerät, welches einige wirklich schöne Zutaten sein eigen nennen kann, der Asus Xonar Essence One:
Asus Xonar Essence One
Asus ist den meisten von uns bereits durch die vielfach eingesetzten Soundkarten bekannt und ist ein Unternehmen mit einem Umsatz von ~ 10 Mrd. USD. Damit sticht Asus 100% aller "normalen" HiFi-Buden, die froh sind, wenn sie einen Umsatz von 1 Mio. realisieren und damit über dementsprechend geringere Manpower für die Entwicklung und über dementsprechend geringere Sourcingpower verfügen. D.h. wenn Joes HiFi-Bude an der Ecke 100 BB PCM1795 kauft, dann bezahlen die dafür 20,-€ pro Stück. Wenn Asus 2 Mio davon kauft, dann zahlen die nur noch 2,-€ pro Stück (wenn überhaupt, denn hier greift auch das Deckungsbeitragsprinzip.... ). Und das gilt natürlich für alle Bauteile, aktiv oder passiv.
Das sind die Zutaten:
Digital:
- DSP: Analog Devices ADSP-21 261 (150MHz SIMD SHARC Core, 900MFLOPS)
- USB: C-Media CM6631 (Asynchronous USB up to 24bit/192khz)
- S / PDIF: AKM AK4113VF (the most powerful AES/EBU transmitter from AKM)
- DAC: 2x BurrBrown PCM1795 (32bit/192khz, 123db SNR) used in mono mode, one for each channel, to increase the SNR and lower the noise. These chips can be found, for example, in the top of the range of Onkyo receivers, the TX-NR5008 model.
Wobei alle OPV gesockelt sind und, je nach gusto, ausgetauscht werden können.Analog speakers:
- 3x JR12ACE3 LM 4562NA (National Semiconductor OPAMP)
- 6x 13AE08W NE 5532P (Texas Instruments OPAMP)
- Nichicon and WIMA capacitors.
Power:
- Toroidal transformer, output +5 V 0.9A, +12 V 0.7A,-12V 0.7A
- 1x PM06AVE3 -5.0 P + LM2940CT (National Semiconductor Voltage Regulator)
- LM2990T -12 P + 2x JM13ABE3 (National Semiconductor Voltage Regulator)
- Capacitors without brand inscription, probably OEM for Asus.
Besprechungen/Nachweise hier:I guess it's got so many opamps because there are 2 discrete DAC chips in mono, so it takes 2 dual opamps for each DAC +/- polarities, 1 dual opamp buffer to amplify them to line level, 2 dual opamps for the balanced XLR output, 1 dual opamp for the unbalanced RCA output, so that's already 9 dual opamps just for the DAC output, then 2 more for the HP out I would guess. Still, they're all 5532 and 4562 which will provide killer measurements...but if you wanna use audiophile parts like OPA827/AD797B/LT1028/ADA4627-1B, it will cost a lot of money and time soldering them. It'd better sound eye popping stock already to warrant all these expenses.
Actually I was shocked about the manufacturing quality of this product, the PSU is big, and internal wiring is very professional, Sanyo and Wima caps, Alps pot, for a 500$ price, it will be a killer IMO.
http://soundnews.ro/2011/09/09/asus-xon ... h-version/
http://www.head-fi.org/t/542563/asus-es ... cebit-2011
http://www.einfach.it/shop/all/8/130/0/ ... 80391.html
Noch ein paar Büldl:
Gruß,
Kai