Wandler-Vorstufe Audiolab M-DAC
Verfasst: 04.12.2011, 09:10
Hallo Freunde,
ein wertes Forumsmitglied machte mich auf die in Kürze erscheinende, fernbedienbare Wandler-Vorstufe Audiolab M-DAC aufmerksam:
Als Preis konnte ich 599,00 £ = ca. 700,00 € ausmachen.
weitere Details unter: http://www.audiolab.co.uk
Specification
Model: M-DAC
General description: Digital-to-analogue converter
DAC: ESS Sabre32 9018 chip
Resolution: 32 bits
Maximum Sampling Frequency: 84.672MHz
Digital input: 2 x 24-bit/192kHz coaxial ,2 x 24-bit/96kHz Toslink optical, 1 x 24-bit/96kHz USB
Digital output: 1 x coaxial, 1x Toslink optical
Output voltage: RCA: 2.25V RMS,XLR: 4.5V RMS
Total Harmonic Distortion: RCA: <0.002%; XLR: <0.0008%
Frequency response: 20Hz - 20kHz (± 0.2dB)
Dynamic range: RCA: >115dB;XLR: >122dB
Crosstalk: RCA: <-120dB; XLR: <-130dB
Dimensions (H x W x D): 59 x 250 x252mm
Power requirements (depending on region): 220--230V /100-120V (50 ~ 60Hz)
Colour: Black, Silver
Standard accessories: power cord, remote control handset, batteries, user manual
Features
• Asynchronous USB supporting 24-bit/96kHz with remote control of PC / MAC Media Player via HID support
• High current, high linearity RCA single-ended & XLR true balanced with fully discrete J-FET CROSS* Class
• Selectable DAC mode or Digital Pre-amplifier mode, allowing direct connection to power amplifiers and active speakers in digital only systems
• 2.7” high contrast OLED display
• "Actual"or"Nominal"Sampling Frequency display – displays the TRUE input sampling frequency with 1Hz resolution
• Digital level meters in dB with peak hold
• CD / DVD SPDIF subcode embedded Track and Time Display
• Advanced de-jittered optical and coaxial SPDIF output, with USB to SPDIF output.
• Full remote control + external remote / BUS I/O loop
• 26 internal regulated supply rails with 10 ultra low noise, low impedance discrete regulators
• 7 user selectable digital filters – fully software upgradeable via the USB port
• Organic ultra low ESR capacitors, high tolerance polypropylene film / foil capacitors, ultra stable very low VCR 0.1% MELF SMD resistors, 4 layer PCB
• External upgradeable power supply interface for a future upgrade path
Viele Grüße
Rudolf
ein wertes Forumsmitglied machte mich auf die in Kürze erscheinende, fernbedienbare Wandler-Vorstufe Audiolab M-DAC aufmerksam:
Als Preis konnte ich 599,00 £ = ca. 700,00 € ausmachen.
weitere Details unter: http://www.audiolab.co.uk
Specification
Model: M-DAC
General description: Digital-to-analogue converter
DAC: ESS Sabre32 9018 chip
Resolution: 32 bits
Maximum Sampling Frequency: 84.672MHz
Digital input: 2 x 24-bit/192kHz coaxial ,2 x 24-bit/96kHz Toslink optical, 1 x 24-bit/96kHz USB
Digital output: 1 x coaxial, 1x Toslink optical
Output voltage: RCA: 2.25V RMS,XLR: 4.5V RMS
Total Harmonic Distortion: RCA: <0.002%; XLR: <0.0008%
Frequency response: 20Hz - 20kHz (± 0.2dB)
Dynamic range: RCA: >115dB;XLR: >122dB
Crosstalk: RCA: <-120dB; XLR: <-130dB
Dimensions (H x W x D): 59 x 250 x252mm
Power requirements (depending on region): 220--230V /100-120V (50 ~ 60Hz)
Colour: Black, Silver
Standard accessories: power cord, remote control handset, batteries, user manual
Features
• Asynchronous USB supporting 24-bit/96kHz with remote control of PC / MAC Media Player via HID support
• High current, high linearity RCA single-ended & XLR true balanced with fully discrete J-FET CROSS* Class
• Selectable DAC mode or Digital Pre-amplifier mode, allowing direct connection to power amplifiers and active speakers in digital only systems
• 2.7” high contrast OLED display
• "Actual"or"Nominal"Sampling Frequency display – displays the TRUE input sampling frequency with 1Hz resolution
• Digital level meters in dB with peak hold
• CD / DVD SPDIF subcode embedded Track and Time Display
• Advanced de-jittered optical and coaxial SPDIF output, with USB to SPDIF output.
• Full remote control + external remote / BUS I/O loop
• 26 internal regulated supply rails with 10 ultra low noise, low impedance discrete regulators
• 7 user selectable digital filters – fully software upgradeable via the USB port
• Organic ultra low ESR capacitors, high tolerance polypropylene film / foil capacitors, ultra stable very low VCR 0.1% MELF SMD resistors, 4 layer PCB
• External upgradeable power supply interface for a future upgrade path
Viele Grüße
Rudolf