D/A-Wandler mit Lautstärkeregelung (Marktübersicht)

axxxxx

Keine Fernbedienung

Beitrag von axxxxx »

Hallo Fujak,

ich bin am Überlegen, ob ich meinen GSonos (noch ohne externes Netzteil.... 8) ) über einen externen DAC laufen lasse, um online convolven zu können.
Aufgrund des Konzeptes wäre der Teac ein ernsthafter Kandidat gewesen, aber ohne FB kommt das Teil nicht in Frage.

Bei allem Verständnis für den Kostendruck ist es für mich ebenfalls nicht nachvollziehbar, warum man gerade an der Fernbedienbarkeit gespart hat.
Mit FB hätte man den Preis sicherlich noch unter der magischen Grenze von 1.000,- € halten können und diverse zusätzliche Kunden gewinnen können.
Das wird für viele Interessenten das No-Go Kriterium sein.

Und es wird noch besser:
Der gleichteure CDP Teac PD-501HR hat eine sehr schicke FB. Wenn das nicht absurd ist, dann weiß ich auch nicht.
Da hätte manfür die (neue) Reference Serie doch eine Systemfernbedienung entwickeln können. Nicht nachvollziehbar.

Gruß,
Kai
spf

Beitrag von spf »

Hallo zusammen,

lässt sich denn zumindest die Lautstärke der XLR outs steuern? Ich kann dies der Infoseite nicht so ganz entnehmen. Mit dem Manko der FB könnte man aber so aktive LS ja direkt betreiben, sofern die LS Regelung nicht nur für den KH Ausgang ist.

Beste Grüße
MacDilbert
Aktiver Hörer
Beiträge: 116
Registriert: 30.04.2012, 14:14
Wohnort: KH@RLP

Beitrag von MacDilbert »

Audiolab Q-DAC

Der kleine M-DAC-Bruder. Eigenartig: Habe weder auf der audiolab-Homepage, noch beim deutschen Vertrieb was über das Gerät gefunden - als wenn er gar nicht für Europa bestimmt wäre; man kann ihn aber munter bei den einschlägigen deutschen Versandhändlern bestellen.
  • Chip: ESS Sabre92 9016
    Abtastrate USB, Coax: 32 kHz - 192 kHz
    Abtastrate Optisch: 32 kHz - 96 kHz
    Digital In: 1x Coax, 1x Toslink optisch, 1x USB
    Digital Out 1x Coax, 1x Toslink optisch
    Preis: 499€
Hier ein Review: http://www.whathifi.com/review/audiolab-q-dac
spf

Beitrag von spf »

Von Destiny Audio gibt es auch was neues:

http://www.destiny-audio.com/cms/de/dac.html
Technische Details:
Signaleingange Coaxial, Optisch, BNC, USB
Analogausgänge Cinch, OP, Cinch Röhre
Samplingfrequenzen/
Abtastraten
32, 44,1, 48, 88,2, 96 kHz
Auflösung 16, 20, 24bit
Frequenzgang 20Hz - 30kHz
Rauschabstand OP Ausgang
OP Ausgang 100 dB
Röhrenausgang 90dB
Klirrfactor OP Ausgang
OP Ausgang <0.001%
Röhrenausgang < 0,1%
Eingangsimpedanz
75 Ohm
Ausgangsimpendanz
600 Ohm
Ausgangsspannung
Cinch 2000mV

KHV 100 – 500mW
600- 32 Ohm
Röhrentyp
5670
Leistungsaufnahme
<25 W
Abmessungen
260mm/ 167/ 55mm
never
Aktiver Hörer
Beiträge: 322
Registriert: 30.12.2012, 11:00

Beitrag von never »

Chord hat vor kurzem einen hochinteressanten DAC/KHV vorgestellt, den HUGO:

http://www.chordelectronics.co.uk/produ ... .asp?id=92

Die bisher zu findenden Preisangaben haben sich zwar leicht nach oben entwickelt, für den US-Markt sind angeblich 2395,- Dollar zu erwarten:

http://www.stereophile.com/content/chor ... dphone-amp

Freundliche Grüße,
never (Udo)
Bild
MacDilbert
Aktiver Hörer
Beiträge: 116
Registriert: 30.04.2012, 14:14
Wohnort: KH@RLP

Beitrag von MacDilbert »

Essence HDACC HDMI/USB DAC
Anscheinend die neue ELWMS am DAC-Himmel - kennt jemand von Euch das Wunderding?
  • • 4 Digital Inputs
    • 2 Analog Inputs
    • 3 Digital Outputs
    • 2 Analog Outputs
    • Headphone Output
    • IR Remote Control
    • HDMI, USB, Optical and Coaxial digital audio inputs support LPCM stereo
    • HDMI input supports LPCM stereo in all modes but can pass surround sound signal while in bypass mode
    • All digital inputs support 192kHz sampling rate at up to 24-bit resolution
    • HDMI, Optical and Coaxial digital outputs
    • All digital inputs can be selectively Sample Rate Converted to 44.1, 48, 88.2, 96, 176.4 and 192 kHz via DSP Engine
    • Highly accurate PLL and low jitter reduction clock system
    • HDMI Audio output can either output the incoming HDMI (HDMI Bypass Mode) or can embed the selected audio signal
Abendliche Grüße
MacDilbert
Bild
axxxxx

Beitrag von axxxxx »

Hallo,
leider kann das Teil wohl kein DSD, damit ist es natürlich bei den Platinohren schon durchgefallen.
Und für 699,- € kann das ja auch nichts sein und kommt auch noch von den Käsebrötchen.
Und hier kann man das Teil schon kaufen:
http://www.hoerzone.de/shop/essence-hig ... enter.html

Gruß,
Kai
spf

Beitrag von spf »

Hi,

also von den Features mal echt sehr cool :)
Wird auf jeden Fall getestet - ggfs. muss dann der Asus E1 weichen.
Und den bösen Jitter killt er auch - das ist doch ganz wichtig :cheers:

VG
MacDilbert
Aktiver Hörer
Beiträge: 116
Registriert: 30.04.2012, 14:14
Wohnort: KH@RLP

Beitrag von MacDilbert »

@spf: dann musst Du schnell testen, sonst kauf' ich mir am Freitag einen audiolab M-DAC ...
@aston456: Platin klingt sch...e - als alter Blechbläser hab' ich natürlich highendige Messingohren :shock:
Bild
spf

Beitrag von spf »

Die Preisrechnung ist halt immer spannend - Dollar in Euro 1zu1 :D

Vielleicht sollte zur besseren Transparenz die Diskussion in einen eigene Thread für die DAC Kiste verlegt werden. Den M-Dac fand ich btw. im Vergleich zum Asus Xonar Essence One genau 0% besser. Der Asus hat halt keine FB, kostet aber nur die Hälfte.
gregor
Aktiver Hörer
Beiträge: 669
Registriert: 08.03.2010, 20:08

Beitrag von gregor »

Es tut sich was: SPL Crimson: http://spl.info/index.php?id=2957&L=0

Beste Grüße
ck
Bild
khonfused
Aktiver Hörer
Beiträge: 917
Registriert: 31.12.2010, 10:56
Wohnort: Mittelfranken

Beitrag von khonfused »

Interessante Wandler-Vorstufe mit zwei DACs vom Ostdeutschen Chefentwickler bei AMR Thorsten Lösch, in DIY Kreisen seit Jahrzehnten bekannt und geschätzt. Das Gerät gibt es schon seit zwei Jahren.
UVP: 3.900 €

Bild
Bild
Bild

Introduction

High-Definition (HD) digital audio is redefining the quality of recorded audio for the 21st Century. Having created some of the most natural and captivating music sources on the CD standard, AMR has turned its attention to High-Definition audio and in its own imitable way, taken the road less travelled.

Our first objective was to deliver the maximum quality of music from the existent libraries of CD standard audio (be it on silver disks or as ripped lossless files) equally balanced with the requirement to also deliver the maximum music quality from the new HD audio formats. We meticulously auditioned the full array of HD DAC chipsets and whittled the field down to one of the latest and most outstanding.

Again, the standard textbook implementation was shunned as we applied the same assiduous design and execution of the multi-award winning CD-77 to unleash the full, latent potential of the HD format. Each stage of the signal path is a technical magnum opus focused upon one objective: the most enchanting and pulsating performance. The result is the DP-777 Digital Processor.

The DP-777 has the same, unparalleled DNA as every other AMR component; with extraordinary digital advancements never seen before in any converter:

Gemini Digital Engine (GDE)* Unlike any other converter, at the core of the Gemini Digital Engine, there is not one, but 2 distinct chipsets that define their generation; one latest generation High-Definition 32-Bit DAC to produce the best sound from HD recordings and one Classic Multibit 16-Bit DAC to produce the best sound from CD. These two "non-identical twins" deliver the best of both worlds in a way that is simply unmatched. Further, the Gemini Digital Engine pushes these chipsets beyond what is thought possible. Using Field Programmable Gate Array (FPGA) and Digital Signal Processing (DSP) to handle the core digital duties, including the memory buffer and the signal processing, the outcome are two specially-commissioned DAC chipsets that perform well beyond the textbook.

Zero Jitter Mode* The Zero Jitter Mode utilises AMR's ingenious Global Master Timing (GMT)* and Intelligent Memory System (IMS) to totally eliminate jitter coming from the source. The Global Master Timing clock system intelligently actualises over 28 million different real-time clock frequencies to exactly match the dynamic input clock down to 0.001Hz (i.e. ~0.04ppm accuracy) of the source. With this new and completely jitterless clock coupled to the Intelligent Memory System (IMS), the GMT/IMS system lock out source jitter once and for all.

24/192kHz Asynchronous USB Input The DP-777's 24/192kHz Asynchronous USB Audio Class 2.0 Input is a true asynchronous decoupling of the DAC system clock from the computer that is also fully future-proofed.
HD Valve Digital input (HD-VDi)* This is AMR's atypical brainchild of using a New Old Stock (NOS) 6N11 high-speed valve designed to operate into several 100Mhz to amplify and purify the high-definition SPDIF signal with zero feedback. Clearly visible on an oscilloscope, with HD-VDi, the signal changes from a blurred to clean and sharp SPDIF signal. Any deficiency in the incoming SPDIF is completely removed.

OptiValve Output Stage Two NOS valves perform the left and right channel analogue amplification and output buffering duties using the same demanding approach as the CD-77/CD-777; where one half amplifies and the other half buffers without any negative feedback loop. No solid-state devices are present in the signal path.
High-End Pre-Amplifier The DP-777's direct-coupled/buffered analogue pre-amplifier stage is capable of accepting two analogue sources in addition to the signal internal to the DP-777. The exceptionally precise 71-step resistor matrix-based Analogue Volume Control system delivers unmatched transparency. To attain the highest sound quality, no digital volume control is anywhere to be found.
*: World's first, AMR exclusive.

Hier einige Tests:

http://www.amr-audio.co.uk/html/dp-777_reviews.html
Bild
axxxxx

Beitrag von axxxxx »

Das mag ja alles sein, aber wenn ich die lustigen Glühkolben auf dem Bild sehe, dann graust es mich schon wieder. Der digitale Teil mag ja jitterbefreit sein, aber dafür packe ich im analogen Teil wieder die weichspülenden Oberwellen aufs Signal? Ganz großes Kino. Osten halt... :mrgreen:

Gruß,
Kai
Koala887
Aktiver Hörer
Beiträge: 537
Registriert: 27.12.2010, 17:23
Wohnort: Eltmann, Unterfranken

Beitrag von Koala887 »

Hallo Kai,
aston456 hat geschrieben:Der digitale Teil mag ja jitterbefreit sein, aber dafür packe ich im analogen Teil wieder die weichspülenden Oberwellen aufs Signal?
schau mal genau hin, die Glühkolben gibt's sogar schon im Digitalteil. :D

Schöne Grüße
Daniel
Bild
Zwodoppelvier
Aktiver Hörer
Beiträge: 1267
Registriert: 07.07.2010, 12:38
Wohnort: Raum Köln / Bonn

Beitrag von Zwodoppelvier »

Hallo miteinander,

in Sachen Digitaltechnik bin ich zwar ein völlig ahnungsloser Zeitgenosse, aber wenn ich lese, daß einer Röhrenstufe an irgendeiner Stelle im Gerät sogleich unterstellt wird, nur
aston456 hat geschrieben:weichspülende Oberwellen aufs Signal (...zu packen...)
muß ich doch anmerken, daß das ein voreiliges Urteil sein kann.

Viele Röhren weisen eine sehr homogene Kennlinienschar auf und sind in der Lage, bereits ohne Gegenkopplung sehr sauber zu reproduzieren. Ich habe schon diverse Halbleiterschaltungen erleben können, die trotz unanfechtbarer Meßwerte von Röhrengeräten hinsichtlich Schlüssigkeit, authentischer Klangfarben, Feindynamik etc. überflügelt wurden. Man sollte vielleicht einmal eine gute Röhrenvorstufe o.ä. gehört haben...

Umgekehrt heißt dies natürlich nicht(!), daß die vielen Teile mit "Alibiröhre" - womöglich noch extra in einem Sichtfenster platziert und von unten blau illuminiert - deshalb das entscheidende Quentchen besser sein müssen. Oft ist das nicht mehr als ein Marketing-Gimmick.

Viele Grüße
Eberhard
Bild
Antworten